Industrial Special probes

P60, P60 Flex
Hand Probe

The P60 Hand Probe is a robust probe with built-in intelligence. Controlled by a multi-function button for fast access to frequently used functions, the P60 probe is equipped with LED lamps illuminating the area tested for leaks for more reliable pinpointing. The probe is also equipped with an easy-to-read OLED display to provide information about the entire leak detection process directly in the palm of your hand.
The unit is available also with flexible neck for leak detection on hard to access locations, typical of test objects with irregular geometric forms.

P50
Hand Probe

Hand probe P50, available also with flex neck, is a new ergonomic hand probe with built-in intelligence facilitating the operator’s control of the instrument. It has red and green LEDS for accept/reject indication and white LED lamps that illuminate the area of leak search around the probe tip. The multifunctional probe button can also be set for activating the zero function when working in tricky backgrounds The Probe tip can be unfastened by the operator using a key, thus enabling a quick and easy sensor change.

Datasheet P50

P50 Flex
Hand Probe with flexible neck

Hand Probe P50 Flex is an alternative to the standard P50 Hand Probe. With its long, flexible neck P 50 Flex is ideal for leak detection on hard to access locations, typical of test objects with irregular geometric forms. P50 is an accessory to Sensistor ISH2000 Hydrogen Leak Detector.

Datasheet p50

PK50, PK50 Flex
Hand Probe

The PK50 Hand Probe is an elegant, ergonomic and extremely robust hand probe replacing the original H50 and H51 hand probes. Available with rigid and flexible neck, it is intended for use on older models of Sensistor Hydrogen Leak Detectors. Easy sensor change allows operators to replace the sensor in a matter of seconds. The ergonomically shaped grip also informs the operator about which direction the probe tip is pointing.

Datasheet PK50

PX57, PX57 Flex
Hand Probe

The PX57 Hand Probe is an accessory to the Ex certified Extrima Leak Detector. Available also with long, flexible neck, the PX57 is ideal for leak detection on hard to access locations, typical of test objects
with irregular geometric forms. Easy sensor change allows operators to replace the sensor in a matter of seconds.

Datasheet PX57

R50
Robot Probe

The R50 Robot Probe is an accessory probe to the ISH2000 Hydrogen Leak Detector that is specifically designed to be easily attached to the nose of an industrial robot. The design is also allowing for maximum robot movement and to enable leak detection on complicated geometries. Easy sensor change allows operators to replace the sensor in a matter of seconds.

Datasheet R50

AP29ECO
Sampling Probe

Sampling Probe AP29ECO is an accessory to Hydrogen Leak Detector Sensistor ISH2000, which automatically takes samples from test chambers or local test points. It is designed for integration into automatic leak test systems in demanding industrial environments. Performs automatic calibration and features an overexposure protection function which minimizes recovery time.

Leaflet AP29ECO

AP55
Sniffer Probe

Sniffer Probe AP55 is an accessory to the Sensistor ISH2000 Hydrogen Leak Detector, developed for measuring a leak rate directly at the location of the leak. Fitting a narrow tube to the end allows testing in locations that are difficult to access with the standard probe. AP55 can locate and quantify a leak at the same time.

Leaflet AP55

AP57
Counter Flow Probe

Counter Flow Probe AP57 is an accessory to the Sensistor ISH2000 Hydrogen Leak Detector, developed for use in confined spaces, such as pneumatic cabinets, engine compartments, aeroplanes, boats, etc. where background build-up would normally mask off leaks. A unique system of air counter flow eliminates the effect of tracer gas in the background and allows leak locating where no other method works.

Leaflet AP57

Click edit button to change this text.